Plug the Printer cable into the machine printing interface (RS-232C Serial Port).
The ACE DT50P Thermal Receipt Printer comes with an RS232 Serial Plug Female to Male cable.
The Flash DT40P Thermal Receipt Printer comes with a USB-B to Male Serial Port cable.
Once connected, Turn On the machine, ensure the baud rate is correctly set up, and start the count.
1. Press the Report Button once. Press the OK button to print the Total value and quantity of notes result.
2. Press the Report Button twice. Press the OK button to print the Serial Numbers of the notes counted.
How to adjust the Printers Baud Rate:
- Access the SET MENU, and press the OK button until you are prompted to input a password. The default password is ↓↓↓↓.
- Access Settings, scroll down, and select the Baud Rate sub-setting.
- The baud rate can change based on the printer which connects to the machine. The baud rate is set at 9600. You can choose between 1200/2400/4800/9600/19200.
- Press on Start to save your selection.
Please reach out to support@deteckusa.com if you need help!