Please read the instructions carefully on how to Upgrade the Main Software
Video SOP: https://www.youtube.com/watch?v=YD_j8uwFNNM
Please ensure the machine is turned OFF before proceeding with the below software upgrade
1. Download the attached (.ZPK) file
https://shop.deteckusa.com/dt600-MainSoft-ZPK
Software Version:
- MXN_DT600_20230209_018.5E7F19B8048DFF0F.ZPK
Important: Please ensure you do not have any previous.ZPK file installed on your computer (from previous sessions) otherwise the new downloaded file will have the following name ending with F0F(1).ZPK It is important that the software uploaded on the USB key have the following name ending F0F.ZPK
2. Plug the USB Key (provided in the Maintenance Kit) into the PC USB port. Please ensure the USB Key is Empty and the existing Format is FAT32
Article: DT600 - USB Key Instructions
https://deteckusa.reamaze.com/kb/dt600/dt600-usb-key-instructions
3. Upload the (.ZPK) on the USB key. Once complete, press Eject to safely remove and proceed to the next step.
Ensure the USB Key has only the (.ZPK) file
4. Before plugging the USB key into the machine, please ensure the Money Counter is switched off.
5. Plug the USB key into the Outer USB Port. Please ensure it is plugged in the OUTER USB Port.
6. Turn on the machine and wait for the software to update (it should take around 1 minute). You will be notified on the display once completed to Pull out the U-Disk
7. Remove the USB key, turn the power off and on
8. Press the CUR button and select the currency of your choice. Press OK to confirm your selection and restart the machine (power off and on)
9. Ensure the new software version is updated properly
Access the Settings by Pressing the OK button for 5 seconds and enter password ↓↓↓↓
Scroll down to Version and Press OK
Please do not hesitate to reach out if you have any questions on support@deteckusa.com or Contact us directly through the portal below.