DT800 - Main Software Update (BIN)

You are viewing an Unlisted article which can only be accessed by people with the direct link.

Please read the instructions carefully on how to Upgrade the Main Software

1. Download the attached (.bin) file
https://shop.deteckusa.com/dt800-MainSoft-BIN

Software Version:
900_System.bin

Important:
- Please ensure you do not have any previous.Bin files installed on your computer (from previous sessions). It is important that the software uploaded on the USB flash drive have the following name 900_system
- If the file name is 900_system(1), it means you had a previous file saved on your folder. Please rename the last version downloaded by removing (1). The correct version should read 900_system

2. Plug the USB flash drive(provided in the Maintenance Kit) into the PC USB port. Please ensure the USB flash drive is Empty and the existing Format is FAT32

Article: DT800 - USB flash drive Instructions
https://deteckusa.reamaze.com/articles/dt800-usb-key-instructions

3. Upload the (.BIN)  on the USB flash drive. Once complete, press Eject to safely remove and proceed to the next step.
Ensure the USB flash drive has only the (.BIN) file

4. Before plugging the USB flash drive into the machine, please ensure the Money Counter is switched off.

5. Plug the USB flash drive into the Upper USB Port. Please ensure it is plugged in the UPPER USB Port.

6. Turn on the machine and wait for the software to update (it should take around 1 minute). You will be notified on the display once completed to Pull out the USB flash drive.

7. Remove the USB flash drive, turn the power off and on

8. Ensure the new software version is updated properly
Access the Settings by Pressing the OK button for 5 seconds and entering the password ↓↓↓↓
Scroll down to Version and Press OK

Please do not hesitate to reach out if you have any questions on support@deteckusa.com or Contact us directly through the portal below.

May 20, 2025

Contact Us

Not finding what you're looking for? Contact Us Directly