Please access the sensor static data interface through the following steps and help pull out the self-check report
We created a step-by-step video instruction on how to complete the process (Step 1-4):
https://youtu.be/dI7yJsQmzVI
Step 1: Long Press the ADD button for quick access. If this doesn’t work, access the SET MENU by pressing the OK button until you are prompted to input a password “↓↓↓↓”
Step 2: Select User Menu to access the settings and scroll down using the down arrow, select Sensor Static Data, then press OK
Step 3: Press the report key and wait until the machine completes the self-test checks
Step 4: Once the motor stops turning, the sensor static learning would have been completed. You will be redirected to the main static data dashboard.
Note: If the self-check prompts an error notification, please report the findings to support@deteckusa.com so we can advise on the troubleshooting steps.
Step 5: If you are experiencing an abnormal error at the start, Press the down arrow “↓” to select the correspondent sensor.
For example, if you are experiencing a “Start Sensor Abnormal Error”, scroll down and select Output START. Press OK to run a self-learning check and auto-adjust the sensitivity level.
Step 6: Press Report again to unlock the Self-Check page and go back to the Sensor Static Data page. Press Start to exit.
Please reach out to support@deteckusa.com if you need help!