T600C - Speed Sensor Cables Connection

You are viewing an Unlisted article which can only be accessed by people with the direct link.

This video will demonstrate how to safely open the machine and ensure the cables are plugged properly

CAUTIOUS: Prior to Opening the Machine, please ensure the Money Counter is turned off and the Power Cable is unplugged from the Wall or Ground Power Socket

Please carefully follow these steps to ensure the Machine doesn't get damaged.

1. Place a piece of cloth on a solid flat surface table. This will help reduce scratches while performing the troubleshooting step
2. Open the Top Cover of the Machine
3. Use a long Philips Screwdriver to unscrew the left side of the Machine (The side next to the CUR and BATCH buttons). There are 2 screws on the bottom and 3 on the inside.
4. Check if the cables ends are properly connected as shown in the picture

Help share with us close-up high-quality pictures or videos so we can run them with our engineers

Please contact our support team at support@deteckusa.com if you have any queries or concerns running the troubleshooting steps

Contact Us

Not finding what you're looking for? Contact Us Directly