Please read the instructions carefully on how to Upgrade the Main Software
1. Download the attached (.bin) file
https://shop.deteckusa.com/dt800-MainSoft-BIN
Software Version:
900_System.bin
Important:
- Please ensure you do not have any previous.Bin files installed on your computer (from previous sessions). It is important that the software uploaded on the USB key have the following name 900_system
- If the file name is 900_system(1), it means you had a previous file saved on your folder. Please rename the last version downloaded by removing (1). The correct version should read 900_system
2. Plug the USB Key (provided in the Maintenance Kit) into the PC USB port. Please ensure the USB Key is Empty and the existing Format is FAT32
Article: DT800 - USB Key Instructions
https://deteckusa.reamaze.com/articles/dt800-usb-key-instructions
3. Upload the (.BIN) on the USB key. Once complete, press Eject to safely remove and proceed to the next step.
Ensure the USB Key has only the (.BIN) file
4. Before plugging the USB key into the machine, please ensure the Money Counter is switched off.
5. Plug the USB key into the Upper USB Port. Please ensure it is plugged in the UPPER USB Port.
6. Turn on the machine and wait for the software to update (it should take around 1 minute). You will be notified on the display once completed to Pull out the U-Disk
7. Remove the USB key, turn the power off and on
8. Ensure the new software version is updated properly
Access the Settings by Pressing the OK button for 5 seconds and entering the password ↓↓↓↓
Scroll down to Version and Press OK
Please do not hesitate to reach out if you have any questions on support@deteckusa.com or Contact us directly through the portal below.