Please read the instructions carefully on how to Upgrade the Main Software.
Ensure the machine is turned OFF before proceeding with the below software upgrade
1. Download the attached (.ZPK) file
https://shop.deteckusa.com/dt600C-MainSoft-ZPK
Important: Please ensure you do not have any previous. ZPK file installed on your computer (from previous sessions).
It is important that the software uploaded on the USB key have the following name for example DT600-------5E3.ZPK
2. Plug the USB Key (provided in the Maintenance Kit) in the PC USB port. Please ensure the USB Key is Empty and the existing Format is FAT32
USB Key Instructions Article: https://deteckusa.reamaze.com/articles/dt600c-usb-key-instructions
3. Upload the (.ZPK) file on the USB key. Once complete, press Eject to safely remove and proceed to the next step.
Please ensure the USB Key has only the (.ZPK) file
4. Before plugging the USB key into the machine, please ensure the Money Counter is switched off.
5. Plug the USB key into the USB Port.
6. Turn on the machine and wait for the software to update (it should take around 3-5 minutes).You will be notified on the display once completed to Pull out the U-Disk
7. Remove the USB key, Turn the power off and on
8. Press the CUR button and select the currency of your choice. Press OK to confirm your selection and restart the machine (power off and on)
9. Ensure the new software version is updated properly
Access Settings by Pressing the OK button for 5 seconds and entering the password ↓↓↓↓
Scroll down to Version and Press OK
Please do not hesitate to reach out if you have any questions at support@deteckusa.com or Contact us directly through the chat portal on the right hand side.