Please ensure the machine is turned OFF before proceeding with the below software upgrade
Below are step-by-step instructions on how to install the new software:
1. Download the attached file (.bin)
https://shop.deteckusa.com/dt600-MainSoft-BIN
2. Extract (or Unzip) the content of the archived file
Important: Please ensure you do not have any previous files installed on your computer (from previous sessions). It is important that the software uploaded on the USB key have the following name:
- 500_system.bin
- DWIN_NET
3. Plug the USB Key provided in the Maintenance Kit and upload only the content of the DT600-MainSoft folder:
- 500_system.bin
- DWIN_NET
* Please ensure the USB Key is Empty and the existing Format is FAT32.
Article USB Key Instructions: https://deteckusa.reamaze.com/kb/dt600/dt600-usb-key-instructions
* Ensure the USB Key has only the (.BIN) and DWIN_NET folder (as shown on the picture)
4. Before plugging the USB key to the machine, please ensure the Money Counter is switched off.
5. Plug the USB key into the Inner USB Port
* Please ensure it's plugged in the INNER USB Port
6. Turn on the machine and wait for the software to update (it should take around 5 minutes). You will be notified on the display once completed to Pull out the U-Disk
7. Remove the USB key, turn the power off and on
8. Ensure the new software version is updated properly
Access the Settings by Pressing the OK button for 5 seconds and enter password ↓↓↓↓
Scroll down to Version and Press OK
Please do not hesitate to reach out if you have any questions at support@deteckusa.com or Contact us directly through the portal below