DT10C - Software Upgrade v213

Please install the latest Software Upgrade if you are experiencing errors or inaccurate counting while scanning new USD bills

The following video will demonstrate how to update the new software:
https://youtu.be/5JDEL2qRcJY

Below step-by-step instructions on how to install the new software:

On your PC

Step 1: Download the attached file (.bin) by pressing on the following:
https://shop.deteckusa.com/dt10c-213

* Important: Please ensure you don't have any previous versions saved on your PC otherwise once you download the correct version, it will download as CWY01C(1).
The correct version should read CWY01C

Step 2: Plug the USB Key into your PC (provided in the Maintenance Kit) and upload the file CWY01C.Bin

* Please ensure the USB Key is Empty and the existing Format is FAT32. Check out the following article for more info:
https://deteckusa.reamaze.com/articles/dt10c-usb-key-instructions

Proceed to Upgrade the Counterfeit Detector software

  1. Ensure the Machine is turned off
  2. Plug the USB key into the machine USB port
  3. Hold the right key REP/CLR button and turn on the machine
  4. The display will show load and after a few seconds, show the new software version 213
  5. Turn off the machine and remove the USB key
  6. Turn on the machine and hope this will help resolve the detection sensitivity of new bills.
  7. You can verify if the correct version 213 was installed by turning on the device, the version will appear on the display for 1 second

Please reach out to our support team support@deteckusa.com if you need further assistance

Mar 3, 2022

Contact Us

Not finding what you're looking for? Contact Us Directly